Thanks
-Admin

Please Like: JDMscg

for locals i also have a complete b18c5 swap stock internals 194whp, 5lug, jdm itr front bumpers, 98 rear bumper, and a MUGEN bumper!

yellow stitch srs itr-x steering wheel SUPER CLEAN $750
itr climate control SOLD
LHD usdm cup holder/cigarette lighter/shifter bezel SOLD
usdm itr armrest with blank badge $150
ukdm gauge cluster SOLD
itr door panels $200

i think i have an itr radio too, ill have to check

that is not a scratch its dust, didnt see it without the flash

kevlar fuel pump covers $80

jdm itr hid headlights super clean, ballast covers were powdercoated multi layer candy pink $700

jdm 98 spec itr tails super clean no cracks/chips $150

hybrid k20 mounts powdercoated same candy pink, havent been used since, only test fit before $600

hybrid k20 adapter harness thing $200

tein circuit master type RA
14k/10k springs
damper adjusters dont work on 3, seem to be fine otherwise
rear spring seats are stuck
$500

function 7 lca's, installed but never driven on
$250

crux race suspension, cusco top hats
one front is blown!
20k/16k springs
$500

(rears arent pictured but included)

jdm center caps
$100

authentic ganador mirrors!
great condition
$300

champ white mirrors fresh paint before storage

Modified by NastyARE at 4:19 PM 3/13/2012

Quote, originally posted by Blazed »

nastyARE=volk KING y0; i'm just living in his world.

wish u was in socal

CaLi UnTouchables
project.Done

PIC Selects R3's, 12K Front, 14k Rear. Less than 10k on the setup. $850

Kosei K1's 15x7'', +38 (Will clear Spoons), white. $500

Comes with DC/EG usdm driver's side seat rail.

No trades.

Location : Chicago

Price: $400.00 firm

C's Short Shifter with shifter bushings for b-series engines.

$100 shipped, $90 picked up.

16x7.5 ADVAN RG Set of Wheels(4)- Silver. 5x114.3 +29 offset.

-Great Condition(Almost MINT) No Curb marks or scratches. Minor markings around a few edges of the lug nut area & 1 small minor blemish on Wheel 4

$1,500.00 FIRM + SHIPPING COST + INSURANCE(OPTIONAL)

PICK UP OPTIONS ARE AVAILABLE (Located in Kansas City Area)

Wheel 1 Front

Wheel Spec’s

Wheel 1 Back

Wheel 2 Front

Wheel 2 Very Minor Blemish Lug nut area

Wheel 2 Back

Wheel 3 Front

Wheel 3 Back

Wheel 4 Front

Wheel 4 Minor Blemishes Lug Nuts area & U can see the 1 blemish on Rim

Wheel 4 Back

-USDM Integra Type R OEM exhaust manifold (Decided to go a different route )
-checkered type r floor mats
-USDM (LHD) Integra Type-R Carbon Fiber Shift Bezel, cigarette lighter/ashtry, driver side vent.
-INTEGRA TYPE R ARM REST WITH BADGE NUMBER/BLANK<br /><br />
Modified by el jdm junkie at 8:11 PM 3/19/2012

Modified by el jdm junkie at 8:18 PM 3/26/2012

Mugen Gen II wing:
$1100obo

Kosei +38 15x7'' wheels in white:
$499

1.

2.

3.

4.

Spoon Filter was used to drive car to dyno 4 pulls on dyno then drive car home, made more power on a auto zone intake, arm and box bought from HMO, Spoon filter sticker included never put it on the box

Complete JDM ITR Intake setup $245 Shipped and PP'd as GIFT
(filter only used for drive to dyno and home)


Modified by Toph at 7:20 PM 4/3/2012

Quote, originally posted by Not so JDM Dan »

you wouldnt even know if i didnt tell you

ITR Air Box 120$

98 Spec JDM Type r ECU 130$
Type R Shifter 90$

Asking 500 bucks without and 620 with prefer local buyers will post pictures soon

Txt 408-835-8945

93 Civic HB- K20A2 I/H/E + 150 Shot